Looking for a cnc programmer – Upwork

Click on the link (Blue-Green color) at the bottom to apply on the relevant Online Freelance website

I need to build a folded piece of birch plywood,made of a total of 5 piece ( see fig4 pag.3)
This job focuses only on piece 1 ( the top)

It’s a birch plywood piece 15 mm thick.It has a trapeizodal aspect.
The final piece,after it has been machined, must have bevel cuts along its perimeter.
The inclination angle (alpha,beta..) is not a common angle,but I have calculated them.
I know the best would be a 5 cnc axis machine,but too expensive.
The aim of this project is :
1. Check if this kind of work is possible with a cnc 3 axis
If point 1 is ok :
2. The number of pass depth to get a good resolution
3.the cnc program (cam) to realize this job
4.The time (about) the realize each piece.

Budget: $60
Posted On: January 07, 2018 13:50 UTC
ID: 212096081
Category: Engineering & Architecture > Other – Engineering & Architecture
Country: Italy
click to apply

Click on the link (Blue-Green color) above to apply on the relevant Online Freelance website. Disclaimer- We do not provide jobs directly, please go to the relevant freelancing website to apply and get your first Freelance Online Job.